AccuLine 40-6537 Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição AccuLine 40-6537. AccuLine 40-6537 18 páginas. Auto-leveling rotating laser
Também para AccuLine 40-6537: Manual de serviço (15 páginas)

Imprimir página

1467H-English

Re-calibration

Referencing the results of the self-check and using the "h" mark (the

mid-point between the highest and the lowest point among A, B, C, D).

1. Enter self-calibration mode

a. Power off the instrument and face the X-axis towards the wall.

b. Press

release the power button while still pressing the vibrate button.

Release the vibrate button after all LED flashes three times. The

laser will enter self-calibration mode and continuously rotates.

2. X-axis calibration

a. Opening the cover on the remote control, press the

button, the X LED light on the laser keypad

which means the laser has entered the self-calibration mode

for X-direction.

b. Press

down until it coincides with the "h" mark.

3. Y-axis calibration

a. Turn the instrument by 90º in self-calibration mode and

make Y-axis facing the wall.

b. Press

flashes which means the laser enters self-calibration mode for

Y-direction.

c. Press

down until it coincides with the "h" mark.

4. Self-calibration confirmation

Press

8/6/08

10:07 AM

button and

VIB

button to make the laser beam move up and

button, the Y LED light on the laser keypad

button to make the laser beam move up and

key after finishing re-calibration on both X and Y

Page 12

button simultaneously. Then

flashes