Olympus CIX100 시스템 설정 매뉴얼 - 페이지 5
{카테고리_이름} Olympus CIX100에 대한 시스템 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CIX100 38 페이지. Cleanliness inspector system
Olympus CIX100에 대해서도 마찬가지입니다: 설치 매뉴얼 (14 페이지), 사용 설명서 (46 페이지)
페이지 인쇄
1
OLYMPUS CIX100 Cleanliness Inspector System
The OLYMPUS CIX100 Cleanliness Inspector System is a complete system
that performs fully automated optical cleanliness analyses on filters. Optical
cleanliness analysis is a method for determining the pollution degree of
components. The cleanliness analysis quantifies and analyzes the particles
in a sample. The system uses standardized methods of analysis to perform
classifications in accordance with international standards. The system is
comprised of a microscope system, a computer, a monitor and specially
developed software.
1.1
Correct use of the system
The OLYMPUS CIX100 Cleanliness Inspector System is designed
exclusively for performing microscopic cleanliness analyses on circular
filters.
Undesignated use can result in injury or damage to property. Olympus Soft
Imaging Solutions GmbH takes no responsibility for damaged caused by
undesignated use.
1.2
About this manual
This manual is aimed at people who will be setting up and bringing the
OLYMPUS CIX100 Cleanliness Inspector System into operation. Read this
manual carefully before setting up the system and bringing it into operation.
Keep this manual in an easily accessible location near the workstation for
reference.
Read all of the other instructions for the components of the system carefully.
The following manuals are delivered with your system:
• Instructions for the system microscope: BX53M
• Instructions for use for the control box: BX3M-CB
• Installation manual for the SC50 camera
• Brief instructions for installing microscope stages
• Assembly instructions for the MFD-2 motorized focus drive
• Documentation for the monitor
• Documentation for the computer
OLYMPUS Cleanliness Inspector CIX100
1 OLYMPUS CIX100 Cleanliness Inspector System
5
System Setup Guide