Olympus CIX100 사용 설명서 - 페이지 26

{카테고리_이름} Olympus CIX100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CIX100 46 페이지. Cleanliness inspector system
Olympus CIX100에 대해서도 마찬가지입니다: 시스템 설정 매뉴얼 (38 페이지), 설치 매뉴얼 (14 페이지)

페이지 인쇄

OLYMPUS CIX100 Cleanliness Inspector System

3. Select an observation method which is still undefined. If you start on top,

you will start with the new sample type without real color slider selected.

4. Make sure that the matching sample type is mounted. If not, carefully mount

the sample following the safety instructions in the chapter "Safety" on

page 9.

5. Click [Next>] to continue.

6. Skip the acquisition of the dark current correction image. Dark current

calibration does not need to be repeated here as it was already calibrated

during installation (i.e. keep the checkbox selected) and click [Next>].

7. Select all check boxes in the following dialog except [Shading Correction]

and [Exposure Correction] and click [Next >].

Each observation method is marked with a tick if the white balance

has been performed already and marked with a yellow exclamation

mark if the white balance has not yet been performed.