Olympus CKX-NU 사용 설명서 - 페이지 5

{카테고리_이름} Olympus CKX-NU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CKX-NU 36 페이지. Reflected fluorescence system

Safety Symbols

The following symbols are found on the system. Study the meaning of the symbols and always use the

equipment in the safest possible manner.

Symbol

Warning Indications

Warning indications are placed at parts where special precaution is required when handling and using

the system. Always heed the warnings.

Warning indication position

Getting Ready

1. The system is composed of precision instruments. Handle it with care and avoid subjecting it to sudden

or severe impact.

2. Do not use the system where it is subjected to direct sunlight, high temperature and humidity, dust or

vibrations. (For the operating conditions, see chapter 6, "SPECIFICATIONS".)

3. Make certain that the burner is installed correctly and that all cords are correctly connected.

4. The stopper mechanisms provided for the functions indicate the limits of motion. To prevent damage,

do not apply excessive force to these limiting mechanisms.

5. Flare may be observed in fluorescence observation using cooled CCD. This flare can be reduced by

inserting a filter, which is available on custom order, in the fluorescence illumination tube. (Please

contact Olympus.)

Indicates that the surface becomes hot, and should not be touched with

bare hands.

Before use, carefully read the instruction manual. Improper use could result

in personal injury to the user and/or damage to the equipment.

Indicates a potential fire hazard; when replacing fuses, be sure that the

replacement fuses are of the specified rating.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Lamp housing

U-LH50HG

REFLECTED FLUORESCENCE SYSTEM

Explanation

[Warning against high temperature]

FOR CKX41