Olympus MX61A 매뉴얼 - 페이지 42
{카테고리_이름} Olympus MX61A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus MX61A 48 페이지. Motorized 300 mm compatible semiconductor/fpd inspection microscope
ƒ
Fig. 34
39
Precise Centering of the Mirror
}The position of the mirror has been adjusted and locked before shipment.
³
Only if you want more precise adjustment of the mirror position, proceed
to the following steps immediately after the procedure in the previous
paragraphs.
Note that, once the following steps are completed, it is no longer pos-
sible to restore the mirror position in the factory shipped condition.
1. Using a pair of tweezers, etc., peel off the two blind stickers | on the rear
|
of the lamp housing.
2. Fit the Allen screwdriver into each of the screws hidden below the sticker
and loosen them. Loosening the two screws releases the locking of the
mirror.
3. Peel off other two blind stickers ƒ to expose the mirror centering holes.
4. Insert the Allen screwdriver into the screw in each mirror centering hole
and adjust the centering of the mirror arc image.