Olympus MX61A Manual - Page 42

Browse online or download pdf Manual for Laboratory Equipment Olympus MX61A. Olympus MX61A 48 pages. Motorized 300 mm compatible semiconductor/fpd inspection microscope

Print Page

Fig. 34

Precise Centering of the Mirror

}The position of the mirror has been adjusted and locked before shipment.

Only if you want more precise adjustment of the mirror position, proceed

to the following steps immediately after the procedure in the previous

paragraphs.

Note that, once the following steps are completed, it is no longer pos-

sible to restore the mirror position in the factory shipped condition.

1. Using a pair of tweezers, etc., peel off the two blind stickers | on the rear

of the lamp housing.

2. Fit the Allen screwdriver into each of the screws hidden below the sticker

and loosen them. Loosening the two screws releases the locking of the

mirror.

3. Peel off other two blind stickers ƒ to expose the mirror centering holes.

4. Insert the Allen screwdriver into the screw in each mirror centering hole

and adjust the centering of the mirror arc image.