Olympus R1 사용 설명서 - 페이지 4
{카테고리_이름} Olympus R1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus R1 47 페이지. Cell counter
Olympus R1에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
IMPORTANT
Safety Precautions
Before using this instrument, read this manual carefully to ensure that you know how to operate it safely and
correctly. Keep this manual in an easily accessible location for future reference. The warning symbols indicate
important safety related information. To protect yourself and others from personal injury or damage to property,
it is essential that you read the warnings and information provided. Use the instrument as specified by Olympus.
If the product is used in a manner not specified by this manual, the safety of the user may be imperiled. In
addition, the product may also be damaged. Always use the equipment according to this manual.
1.
Install the instrument on a sturdy and level surface. Avoid vibrations from other devices.
2.
Do not touch any of the components with wet hands.
3.
Operate the instrument in the conditions described in the Environmental Conditions for Operation. The temperature
and humidity requirements are especially important.
4.
Use the components provided or authorized by Olympus. If the proper combination of components are not used,
product safety performance cannot be guaranteed.
5.
Always use the AC adapter and power cord provided by Olympus. If the proper AC adapter and power cord are not
used, the electric safety and EMC (Electro-Magnetic Compatibility) performance of the device cannot be
guaranteed.
6.
Ensure that the input voltage is compatible with the instrument's power supply voltage.
7.
Connect the ground terminal of the power cord and that of the power outlet. If the device is not grounded, our
intended electric safety and EMC performance of the device cannot be guaranteed.
8.
Turn the instrument on only after connecting the power cord and AC adapter to both the power source and the
instrument. Turn the instrument off before disconnecting the power cord and/or moving the instrument.
9.
Disconnect the power cord after operation or in the case of abnormalities.
10. This instrument complies with the emission and immunity requirements described in IEC61326 series.
11. Do not disassemble the instrument in any event. If the instrument is malfunctioning or broken, please contact
Olympus. Disassembling the instrument invalidates its warranty.
12. The USB memory provided with this product is for exclusive use with the R1. Do not use it for any other purpose.
13. Commercial USB memories may not be compatible with this product.
14. When connecting or removing the USB memory to or from a computer, be sure to follow the precautions described
in the instruction manuals of the computer and its peripheral equipment.
15. When connecting the USB memory to a computer, be careful not to be infected by computer viruses.
16. Olympus is not liable for the loss or destruction of recorded data. Due to the general lifetime of data storage
devices, the files saved on the USB memory may be lost after several years. As image data may be lost or
destroyed unexpectedly, make frequent backups of the data. Olympus shall have no liability for any damage
(including compensation for the corrupted image data) from the use or incapable use of this product. Recorded
image data may be lost or destroyed in the following cases:
a.
When the user or a third party uses the USB memory incorrectly.
b.
When the user or a third party carries out a repair to the product.
c.
When USB memory is affected by static or electric noise.
d.
When the following actions are taken while the R1 is recording to USB memory or while deleting
(initializing):
• Disconnecting the USB memory.
• Shutting down the system.
• Pushing the power button to OFF.
• Unplugging the AC adapter.
• Unplugging the power cord.
• If the instrument fails.
17. When disposing of this instrument, check and observe the regulations and rules of your local government.
3