Axler CS-CF-30LW 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Axler CS-CF-30LW에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axler CS-CF-30LW 6 페이지.

2. Attach the camera to the tripod head.

Important!

DO NOT MOUNT THE TRIPOD HEAD WITH THE CAMERA ATTACHED!

Mount the camera only once the tripod head is secure on the camera

platform.

U S I N G T H E S L I D E R

Once your camera is mounted, loosen the brake, and manually move your

camera along the slider. If the slider is positioned at an incline, keep one

hand on the camera base before loosening the brake.

A D J U S T I N G T H E R O L L E R T E N S I O N

The two interior rollers are preset to the ideal tension. If they loosen

during the course of normal use, you can adjust the roller tension:

1. Use the included hex key to loosen the

screws that secure the ring that holds

the rollers.

2. Turn the ring to adjust the tension.

3. Retighten the screws.

S P E C I F I C AT I O N S :

• Slide length: 30 in. (76.2 cm)

• Maximum load capacity: 18 lb. (8.16 kg)

• Mounting post: 1/4˝-20 with 3/8˝ adapter

• Tripod accessory sockets: 1/4˝-20 and 3/8˝-16

• Dimensions (L ¬ W ¬ H): 34.5 ¬ 6.5 in. (87.6 ¬ 16.5 cm)

• Maximum height: 4.75 in. (12.1 cm)

• Weight: 3.3 lb. (1.5 kg)