Axminster Engineer Series 운영 매뉴얼 - 페이지 6

{카테고리_이름} Axminster Engineer Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Engineer Series 20 페이지. Pillar drill
Axminster Engineer Series에 대해서도 마찬가지입니다: 원본 사용 설명서 (16 페이지), 원본 사용 설명서 (16 페이지), 원본 사용 설명서 (19 페이지), 원본 사용 설명서 (18 페이지)

페이지 인쇄
Axminster Engineer Series 운영 매뉴얼
Installation
CAUTION!
DO NOT ATTEMPT TO USE THE MACHINE UNTIL INSTALLTION IS CAMPLETED,
AND ALL PRELIMINARY CHECKS HAVE BEEN MADE IN ACCORDANCE WITH THIS
MANUAL.

MOUNTING THE MACHINE

The machine should be mounted on a strong, heavy workbench, of sufficient height so
that you do not need to bend your back to perform normal operations.
Ensure the location is adequately lit and that you will not be working in your own shadow.
We strongly recommend that the machine bolted firmly to strong workbench using the
tapped holes used to secure the feet to the machine. This is to provide added stability and
consequently, additional safety.
To do this, first drill four M12 clearance holes in a worktop, at the dimensions
shown in the diagram opposite, and with appropriate length M10 bolts, or screws,
with flat washers. (not supply, you need prepare these by yourself).
210
Application
This small mill machine is both for milling or drilling and tapping, widely used in different
places. Fine exterior, wide range of speed and easy to use.
Designed for industrial usage milling, drilling, tapping, reaming, steps and mill plane with
metal and other material.
5