Alphacom Regency600 사용자 설명서 - 페이지 10

{카테고리_이름} Alphacom Regency600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphacom Regency600 18 페이지. Regency range businessphone

Connecting to Telephone Socket

When the setting up instructions have been completed, connect the plug at the end of

the telephone lead into the telephone socket. The plug will only fit the correct way round.

RINgER Off/LO/HI switch.

Set the switch to the LO or Hl position as desired to give a quiet or loud ring. The Ringer

may also be switched Off by setting the switch to the Off position. Outgoing calls may

still be made with the switch set to the Off position.

RINgER pITCH switch.

Set the switch to the Hl, MED or LO position to adjust the pitch of the ringer.

10.

you may wish to mount the Regency 600 businessphone on a wall.

To do this:

Slide the plastic, "wall mount" upwards to remove, turn it around and replace it in the

slot.

The Handset will then stay in the cradle when the telephone is on the wall.

position screw into the wall ensuring that the screw head is 5mm from the wall.

place the telephone on the screw using the keyhole slot on the rear of the telephone.