Alphacom Regency600 Kullanıcı Kılavuzu - Sayfa 10

Telefon Alphacom Regency600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alphacom Regency600 18 sayfaları. Regency range businessphone

Sayfayı Yazdır

Connecting to Telephone Socket

When the setting up instructions have been completed, connect the plug at the end of

the telephone lead into the telephone socket. The plug will only fit the correct way round.

Setting the Ringer

RINgER Off/LO/HI switch.

Set the switch to the LO or Hl position as desired to give a quiet or loud ring. The Ringer

may also be switched Off by setting the switch to the Off position. Outgoing calls may

still be made with the switch set to the Off position.

RINgER pITCH switch.

Set the switch to the Hl, MED or LO position to adjust the pitch of the ringer.

10.

Wall Mounting

you may wish to mount the Regency 600 businessphone on a wall.

To do this:

Slide the plastic, "wall mount" upwards to remove, turn it around and replace it in the

slot.

The Handset will then stay in the cradle when the telephone is on the wall.

position screw into the wall ensuring that the screw head is 5mm from the wall.

place the telephone on the screw using the keyhole slot on the rear of the telephone.