Alphacom Regency600 Kullanıcı Kılavuzu - Sayfa 11

Telefon Alphacom Regency600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alphacom Regency600 18 sayfaları. Regency range businessphone

Sayfayı Yazdır

11.

Setting up

11.1

11.2

11.3

11.4

11.5

CONNECTING TElEPHONE

The plug at the end of the telephone lead should be connected into a

telephone modular socket.

Warning – the calendar memory may be lost if the telephone is

disconnected from the telephone line.

RINGER vOlUME OFF lO HI SWITCH

Set the Ringer Volume switch on base unit to adjust the ringer the required

volume

RINGER PITCH lOW MED HI SWITCH

Set the Ringer pitch switch on base unit to adjust the ringer the required

tone frequency.

MESSAGE ON/OFF SWITCH

If you are using a compatible switchboard, the message indicator light will

indicate if you have message waiting.

To use the message waiting facility you may need to move the message On/

Off switch (located under the memory card) to the On position. Consult you

switchboard provider for more information.

Warning - if this telephone is not being used on a switchboard, the Message

On/Off switch (located under the memory card) must be in the off position.

THE RECAll MODE SElECTOR SWITCH

If you are connected to TONE dialing exchange, set the switch to the TbR

(Timed break Recall) position to enable you to access certain Network

Services.

If you are connected to a puLSE dialing exchange, set the switch to ELR

(Earth Loop) position as recall has no function on direct lines connected to

such exchanges.(This will avoid the possibility of cutting off your call should

the recall button be pressed accidentally.)

If you are connected to a pAbX, set the switch according to the

requirements of your particular pAbX. If in doubt, consult your pAbX

Instructions or your pAbX maintainer.