Axminster Craft 105243 원본 사용 설명서 - 페이지 11

{카테고리_이름} Axminster Craft 105243에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Craft 105243 16 페이지.

Code 410057

Diamond Dressing Block useful for dressing across the

width of the grinding wheels or to produce flatter surfaces

than single point dressers.

CONNECT THE GRINDER

TO THE MAINS SUPPLY.

Switch the grinder on and allow it to run for at least one

minute. Rest the dressing tool on the tool rest and advance

it to the stone until it touches the maximum diameter;

gently move the dresser back and forth across the face of

the stone until all irregularities have been removed and

the edges of the stone are nice and sharp, see fig 05.

Fig 05

Dressing the Stone/Changing the Light Bulbs

Changing the Light Bulb

To replace a blown light bulb, follow the instruction below.

Step 1

Phillips screw

Remove the two Phillips screws from the light bulb housing

cover and remove.

Step 2

Press the bulb in and turn to remove. Replace with a new

12V 10W bulb. Re-fit the light bulb and replace the housing

and secure with the two Phillips screws.