AXMINSTER TOOLS WORKSHOP AW1502WSG 원본 사용 설명서 - 페이지 5

{카테고리_이름} AXMINSTER TOOLS WORKSHOP AW1502WSG에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AXMINSTER TOOLS WORKSHOP AW1502WSG 17 페이지.

SPECIFIC SAFETY PRECAUTIONS FOR GRINDING MACHINES

12. Always make sure the spark guards and eye shields

are in place, that they are properly adjusted and

secured.

13. Keep the spark guards close to the wheels and

re-adjust them as the wheels wear.

14. Ensure the soft washer and the flanges furnished

with the grinder are used to mount any attachments

(grinding wheels, wire brushes, buffing wheels, etc)

onto the shaft.

15. Always stand to one side of the grinder when

starting the machine.

Locating pin

16. Avoid awkward hand positions where a sudden slip

could cause the hands to come into contact with a

grinding wheel, wire brush etc.

17. If the wheel requires dressing, dress only the front

of the wheel, do not dress the sides.

18. Do not use any attachments that causes the

machine to vibrate. If, after changing grinding wheels

or adding attachments, the machine does vibrate,

remove the recently replaced item and change again.

19. Grinding creates heat. Do not touch the work face

of the work piece until you are sure it has cooled down

sufficiently.

ASSEMBLY

Continues Over...