AXMINSTER TOOLS WORKSHOP AW1502WSG Manual de instruções original - Página 5
Procurar online ou descarregar pdf Manual de instruções original para Moedor AXMINSTER TOOLS WORKSHOP AW1502WSG. AXMINSTER TOOLS WORKSHOP AW1502WSG 17 páginas.
Imprimir páginaSPECIFIC SAFETY PRECAUTIONS FOR GRINDING MACHINES
12. Always make sure the spark guards and eye shields
are in place, that they are properly adjusted and
secured.
13. Keep the spark guards close to the wheels and
re-adjust them as the wheels wear.
14. Ensure the soft washer and the flanges furnished
with the grinder are used to mount any attachments
(grinding wheels, wire brushes, buffing wheels, etc)
onto the shaft.
15. Always stand to one side of the grinder when
starting the machine.
1
D
2
C
E
Locating pin
16. Avoid awkward hand positions where a sudden slip
could cause the hands to come into contact with a
grinding wheel, wire brush etc.
17. If the wheel requires dressing, dress only the front
of the wheel, do not dress the sides.
18. Do not use any attachments that causes the
machine to vibrate. If, after changing grinding wheels
or adding attachments, the machine does vibrate,
remove the recently replaced item and change again.
19. Grinding creates heat. Do not touch the work face
of the work piece until you are sure it has cooled down
sufficiently.
B
B
C
5
ASSEMBLY
2
D
3
4
E
Continues Over...