Arbutus Medical DCB127 사용 설명서 지침 - 페이지 11

{카테고리_이름} Arbutus Medical DCB127에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Arbutus Medical DCB127 18 페이지.

3. Insert chuck adapter into quick-release

chuck. You should hear a click sound.

4. Screw the chuck adapter and the nose

piece together until O-ring is no longer

visible.

5. Check the engagement between Chuck

Adapter and drill by pulling up on the

chuck.

Do not test the engagement of the hex-

shaft before sealing the closure, as the shaft

becomes contaminated once touching the

drill and can then be pulled out of the bag (if

it is improperly engaged), and contaminate

your gloves.

4.7. Install the Drill Bit

Sterile Team Member

1. Insert drill bit into the chuck adapter.

2. Tighten with chuck key.

4.8. Pre-cleaning After Use

Sterile Team Member

1. Remove drill bit from soiled DrillCover linen.

Do not loosen chuck more than required to remove bit; this draws the chuck jaws into the

chuck and makes it more difficult to remove soil.

2. Remove excess soil from device with a non-linting wipe.

3. Spray soiled device with a solution of neutral pH enzymatic detergent (between 7pH –

8pH) on the linen, buckles, chuck piece and into the chuck. Enzyme concentration should

follow manufacturer recommendations. Do not use a saline solution for pre-cleaning as it

will damage the device.

4. Disassemble the DrillCover linen.

DrillCover Hex System: Instructions For Use