ARC Automate 프로그래밍 지침 매뉴얼 - 페이지 8

{카테고리_이름} ARC Automate에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC Automate 16 페이지. 15 channel remote

ARC Automate 프로그래밍 지침 매뉴얼
5

PROGRAMMING

5.1

Protocol selection

This device can be configured to operate Rollease Acmeda line "EL" motors.
(The default mode is ARC protocol.)
To toggle between ARC & EL modes, follow the following steps.
Hold P2 whilst inserting the
5.2

Using motor P1 button

IMPORTANT
Multiple motors can be grouped onto shared channels for co-ordinated control. Limit settings and favorite positions cannot be adjusted when
motors are grouped together.
• Confirm that motor limits and favorite position are already set for each individual motor.
• Ensure that each motor you want to group is also assigned to another channel by itself
Select a channel on switch
using the CHANNEL UP or
CHANNEL DOWN button(s).
OR
8 | Automate
Programming Instructions | 15 Channel Remote
battery
+
Hold P1 button on motor
Motor Response
Approx.
Screen flashes x 5
Display Response
Screen Flashes "1" = ARC MODE
Screen Flashes "2" = EL MODE
head.
RELEASE P1
Hold STOP on switch.
Motor Response
Approx.