ARC Automate 프로그래밍 지침 매뉴얼 - 페이지 7
{카테고리_이름} ARC Automate에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC Automate 16 페이지. 15 channel remote
페이지 인쇄
4.3
Selecting a channel
Press CHANNEL UP to step via increments
through the channels 1 - 15
Hold CHANNEL UP to scroll continuously
through the channels 1 - 15
IMPORTANT
One channel must be selected at all times.
You can cycle through 1-15 by pressing only CHANNEL UP or you use the CHANNEL DOWN button to cycle in reverse or a
combination of both.
4.4
Group control using channel "0"
Channel "0" is pre-set to control ALL shades paired within your multi-channel remote. To create customized
group channels, refer to section 6.
Press CHANNEL DOWN to step via increments
through the channels 15 - 1
Hold CHANNEL DOWN to scroll continuously
through the channels 15 - 1
Programming Instructions | 15 Channel Remote | 7
Automate
™