ARC Automate Instrukcja programowania - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja programowania dla Pilot zdalnego sterowania ARC Automate. ARC Automate 16 stron. 15 channel remote

4.3

Selecting a channel

Press CHANNEL UP to step via increments

through the channels 1 - 15

Hold CHANNEL UP to scroll continuously

through the channels 1 - 15

IMPORTANT

One channel must be selected at all times.

You can cycle through 1-15 by pressing only CHANNEL UP or you use the CHANNEL DOWN button to cycle in reverse or a

combination of both.

4.4

Channel "0" is pre-set to control ALL shades paired within your multi-channel remote. To create customized

group channels, refer to section 6.

Press CHANNEL DOWN to step via increments

through the channels 15 - 1

Hold CHANNEL DOWN to scroll continuously

through the channels 15 - 1

Programming Instructions | 15 Channel Remote | 7

Automate

™