ARC Audio KS125.2 MINI 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} ARC Audio KS125.2 MINI에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC Audio KS125.2 MINI 17 페이지. Moto series

Step 6-

Installing the Speakers

A. Remove the (3) T25 torx screws that hold the factory

speaker plate in place. (See Figure 6A and 6B)

B. With both speaker panels removed from the motorcycle

remove the (4) #2 phillips screws from the speakers and

seperate. (See Figure 6C)

--If installing Coaxial Speakers skip ahead to step 6I--

C. Carefully remove the front grill screen attached to

the speaker plate. Be carefuly to not rip the material

as it is attached to the plastic plate with double sided

tape. (See Figure 6D)

D. Carefully position your hole saw in the far corner

of the now bare speaker plate. Then drill your tweeter

openings. (See Figure 6E)

E. Seperate the tweeter cup assembly from the tweeter

and mark the top trim of the cup for trimming. Once you

have marked the tweeter trim the edge of the lip of the

tweeter so that it can sit flat onto the plate. (See

Figure 6F) Trim the outer edges and then grind them

smooth with a grinder or sand paper. Then firmly press

them in place.(See Figure 6F)

F. After the upper tweeter trim rings have been trimmed

and cleaned using a hot glue gun, secure the tweeter

trim cup to the plate with a sufficient ammount of adhe-

sieve. (See Figure 6G)

G. After giving the tweeter cups suffecient time to

allow the hot glue to dry mount the tweeters to the cups

by pressing firmly till you hear the 2 parts of the cup

snap together.

Speaker Installation

Figure 6A-

Figure 6B-

Figure 6C-

Figure 6D-

Figure 6E-

Figure 6F-

Figure 6G-