Cinier Greenor 설치 지침 - 페이지 6

{카테고리_이름} Cinier Greenor에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cinier Greenor 9 페이지. Fan coil

5 - Electrical connection of the rough

WARNING : ELECTRIC SHOCK HAZARD CAN CAUSE INJURY OR DEATH. BEFORE ATTEMPTING

TO INSTALL THE UNIT, TURN OFF THE POWER AND DISCONNECT ALL POWER SUPPLY

CIRCUITS.

Only a LICENSED CONTRACTOR may open the fan coil.

Connect the power supply cable 2+PE to the plug provided in accordance with current legislation and local

building codes.

Greenor is to be connected to a 230V/50Hz grounded power supply line.

(Drawing No 4)

Cable must not overhang from its protective ducting to prevent potential pinching by the front panel of the unit.

Make sure that power supply can be disconnected across all contacts.

Screw the cover back on

Picture No 4 : Connection scheme for electric connection

Electrical connections for «heating only» version

Color of wire

Blue

Brown or black

Green-yellow

Electrical connections for «reversible» version

Remove shunt clamp 3/4

Color of wire

Blue

Brown or black

Green-yellow

Denomination

Neutral N

Phase L

Ground

Denomination

Neutral N

Phase L

Ground

Clamp

N (on the right)

L (on the right)

(on the right)

Clamp

1 (on the left)

2 (on the right)

(on the left)