Accurate Technology Digi-Stop 사용자 설명서 - 페이지 15
{카테고리_이름} Accurate Technology Digi-Stop에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology Digi-Stop 16 페이지. Complete digital stop and fence system for chop saws, radial arm saws, and miter saws
페이지 인쇄Frequently Asked Questions
What F/W (Firmware) version do I have?
The readout will display d 2.xxx on power up.
This is the firmware version of your readout .
What does
no Enc
no Enc
no Enc
no Enc
If the encoder cable is unplugged from the readout , no Enc
the display. To clear: Be sure the encoder is on the scale and plugged into the
readout.
The battery clips seem to be very loose. Is this normal?
Yes. DO NOT
and the case. These clips are designed to expand when the two case halves
are screwed together.
The readings are "backwards"?
You can change reading direction of the Digi-Stop by changing the value of
Programming Parameter Pr 2.
Accurate Technology DigiStop
mean?
attempt to bend these clips or wedge anything between them
no Enc will appear on
no Enc
no Enc
Page 15 of 16