Arcade Pico CAM 2.0 사용자 설명서 - 페이지 5

{카테고리_이름} Arcade Pico CAM 2.0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcade Pico CAM 2.0 18 페이지. Camera drone

Pre-flight preparation

Charging the battery

1) Ensure the battery is removed from the Drone

2) Using the supplied USB charging cable, connect one end to the

battery and connect the USB end to a power supply

3) An indicator light on the USB charging cable will turn ON to

indicate it is charging

4) Charge for 45 minutes to ensure the battery is fully charged

5) When fully charged, the indicator light will turn OFF

6) Repeat this process for recharging the battery each time

Note: We recommend charging the battery outside of the Drone to reduce heat build.

High temperatures can damage both the Drone and the battery.

1) Carefully remove the Battery cover (16), using the Screwdriver provided

and insert 4 x AA batteries*, according to indicated polarity. Then replace

the back cover of the controller

2) Make sure the batteries (AA) are correctly installed under the supervision of

an adult. Refrain from mixing old and new batteries as well as different types

*Note: Batteries are not included.