Arcade Pico CAM 2.0 사용자 설명서 - 페이지 7
{카테고리_이름} Arcade Pico CAM 2.0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcade Pico CAM 2.0 18 페이지. Camera drone
페이지 인쇄
Flying your Pico Cam 2.0
Taking off
1) To start the Drone motors, move the Left throttle (11) to the bottom left
corner and the Right throttle (19) to the bottom right corner, at the
same time (as shown in the diagram)
2)
Next, to raise the Drone, gently push the Left throttle (11) upwards.
The Drone will take off quickly, so be careful to only push the
Left throttle (11) slightly upwards, whilst ensuring the Drone has enough
clearance above it. Alternatively, once the motors have started, you can
press One key take-off (10), and the Drone will take off
OFF
ON
12
Landing
To land the Drone, pull the Left throttle (11) downwards. Once the Drone lands
on the surface, the motors will automatically turn OFF. You can also land the
Drone by pressing One key land (10), and the Drone will land itself.
OFF
ON
Emergency stop
If the Drone has crashed and/or has become stuck on an object, you can
quickly turn off the motors by holding down Emergency stop (10). If the
Drone becomes stuck and the motors are allowed to continue spinning,
this will cause damage to the blades and possibly irreversible damage to
the motors.
Note: When the Drone's LED indicators (3) begin to flash, it is indicating that the
battery is running low. You should fly the Drone back to where you are and land as
soon as possible. The Drone will automatically begin to descend, so ensure you direct
the Drone to a safe landing place.
13