Arcam A25 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Arcam A25에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcam A25 13 페이지.

Bluetooth Operation



To pair your Bluetooth source device, open the Bluetooth settings on your source device and scan for

A5/A15/A25 ###### from the list. Each product has a unique ID.



By default, the amplifier does not need to be on the BT input for Bluetooth pairing of a source device.



The Amplifier can recall 5 device pairings. If 5 are in memory already, the oldest will be replaced.



Because portable devices often have a volume slider, there is a maximum volume setting in the amplifier to

prevent excessive volume output being selected accidentally. The default is 40.



To pair Bluetooth headphones, press



When you see SPEAKERS, press the down cursor button on the remote control to see options. Paired

Headphones will be listed, or select Pair BT Output (A5/A15) or Pair New Bluetooth Device (A25). Your

headphone must be in pairing mode to be discovered and paired.



Bluetooth headphones cannot be used with the Bluetooth input.

Press the MENU button on the amplifier or the

Use the the navigation buttons on the remote control.

Select between Speakers and Bluetooth headphones. Bluetooth headphones need to be on

and paired to appear in the list.

Audio Output

Default is Speakers.

To pair new Bluetooth headphones, put them in pairing mode, and then press the DOWN

cursor and select PAIR BT OUTPUT (A5 & A15) or PAIR NEW BT DEVICE (A25).

Adjust the volume balance for left or right gain using the UP and DOWN curcor buttons and

Balance

select to set.

Default is 0 (centre).

Select a different DAC filter.

DAC Filter

Default is 0 (A5 & A15) or LIN PHASE FAST (A25).

Select between STD (Standard) and WDE (Wide) PLL settings. Wide setting is more tollerant

(Input) PLL

of variable quality digital audio sources such as satellite receivers.

(A5 & A15 only)

Default is STD.

ARCAM A5_A15_A25 OM EN

on the remote control and select Audio Output.

on the remote control.