AXTON AB25A 설치 매뉴얼 - 페이지 14

{카테고리_이름} AXTON AB25A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXTON AB25A 20 페이지. 10" active subwoofer

3. MOUNTING OF THE ACTIVE SUB

Attention! For your own safety, disconnect the negative battery terminal (-12V), before you

start any wiring work!

The mounting location should be carefully selected, and in the interest of passive driver and

passenger safety, this active subwoofer must be securely mounted.

Once the location where the active subwoofer will be mounted is clear, use the unit as a

template for the marking of the mounting holes with pencil or felt-tip marker. The mounting

holes should be pilot-drilled, using a 2,5 mm or 3mm drill bit.

4. CABLE ROUTING AND WIRING

Use power cables with at least 10 mm² cross section. Run the positive main power cable

(„+12 V") directly from the positive terminal of the car battery to the AB25A. For protection

of your car audio system against electrical fire hazards, resulting from a short-circuit of the

main power cable to chassis ground, a main fuse holder must be inserted within the first

30 cm of the positive main power cable. The applicable fuse value must be matched to the

limitations of your main power cable and the current draw of the amp-module – therefore

choose an appropriate fuse value, but no less than 30 A.

– 14 –