Axxera AXV3D 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Axxera AXV3D에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxera AXV3D 15 페이지. Multimedia dvd receiver with ultramotion display

Auxiliary Inputs &

Rear Camera Operation

Bluetooth Operation

(Optional)

AXV3D

Operation

Auxiliary Inputs & Rear Camera Operation

Connect an optional audio/video source into the 3.5mm input on the

front panel (AV1) or to the red/white/yellow RCA connectors on the

back of the unit (AV2). Select AV1 or AV2 from the Main Menu to

access audio or video.

Rear Camera

Connect an optional rear camera to the Camera Input (yellow RCA

connector labeled 'CAM IN'). Connect the reverse lamp wire to the

REVERSE line of unit. The unit will automatically select camera mode

when connected to the reverse lamp circuitry.

Preparation

To connect a Bluetooth device, install and connect the BTM100 (sold

separately). When connected to the AXV3D, the BTM100 supports HFP

(hands-free pro le), A2DP (advanced audio distribution pro le), AVRCP

(audio video remote control pro le) and PBAP (phone book access pro le).

Before you can use a Bluetooth device, it must be paired and connected.

Make sure that Bluetooth is activated on your device before you begin

the pairing process.

Pairing a New Device

The BTM100 Bluetooth interface module (sold separately) broadcasts

the pairing signal constantly when no devices are currently connected

Complete the pairing sequence from your Bluetooth device. Refer to the

owner's manual for your device for more details.

The device name is "BTM100"

*Please note that no password is required for pairing.

Once pairing is complete, the TALK button on the BTM100 will be

illuminated in blue.

Note: The AXV3D can be in any mode of operation when pairing is

performed.

Disconnecting a Device

Press

, then press "Disconnect" to disconnect the currently-paired

device.

Note

: The unit must be disconnected from the current device before

beginning the pairing sequence for a new device.

If you press

when no device is connected, the unit will show the list of

previously-paired devices. Press any device name to repair that device.