ARCBRO Scout2 서비스 지원

{카테고리_이름} ARCBRO Scout2에 대한 서비스 지원을 온라인으로 검색하거나 PDF를 다운로드하세요. ARCBRO Scout2 4 페이지. How to solve machine does not arcing

Service Support Spirit

How to solve machine does not arcing—Scout2

 Problem : The machine does not arcing,

Solution overview:

Problem analysis:



Test the plasma power source

Solution：The plasma and the machine are connected by four wires, They are: ARC Start, ARC

Start, ARC+ ARC-; as shown in the figure.

Short-circuit A and B of plasma power side, if arc start, the plasma power source is

ok, otherwise plasma power source problem;

NOTE: You can directly short-circuit the arcing signal on the plasma power supply.

Plasam

Take powermax45XP as an example:

Unique Solution

1. Power does not ARC start.

2. The machine does not signal arcing;

CNC