ARCBRO Scout2 Сервісна підтримка

Переглянути онлайн або завантажити pdf Сервісна підтримка для Промислове обладнання ARCBRO Scout2. ARCBRO Scout2 4 сторінки. How to solve machine does not arcing

Друкувати сторінку

Service Support Spirit

How to solve machine does not arcing—Scout2

 Problem : The machine does not arcing,

Solution overview:

Problem analysis:



Test the plasma power source

Solution：The plasma and the machine are connected by four wires, They are: ARC Start, ARC

Start, ARC+ ARC-; as shown in the figure.

Short-circuit A and B of plasma power side, if arc start, the plasma power source is

ok, otherwise plasma power source problem;

NOTE: You can directly short-circuit the arcing signal on the plasma power supply.

Plasam

Take powermax45XP as an example:

Unique Solution

1. Power does not ARC start.

2. The machine does not signal arcing;

CNC