ARCCAPTAIN ARC200 사용자 설명서 - 페이지 12

{카테고리_이름} ARCCAPTAIN ARC200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARCCAPTAIN ARC200 15 페이지. Inverter welding machine

5.2 Strap Installation

Step 1: Separate the velcro.

Step 2: Pull out one side through the strap hole

on the front panel with hook side of the velcro

up.

Step 3: Pull out it to well stick hook side of the

velcro to loop side and across the nylon buckle.

Repeat it on the other side.

Step 4: Adjust the length by pulling the nylon

buckle (as shown in the picture).

Step 5: Proper state after installation:

1. Strap does not twist;

2. Buckle side of shoulder pad is up, while its

flat side faces the machine (as shown in the

picture);

3. Straps are well locked.