digico D-TuBe 매뉴얼 - 페이지 3

{카테고리_이름} digico D-TuBe에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. digico D-TuBe 6 페이지. 8 channel valve mic input card

D-TuBe

D-TuBe Contents

1.1 Introduction ....................................................................................... 1-3

1.2 Normal Operation ............................................................................. 1-3

1.3 Hardware Installation........................................................................ 1-4

1.4 Console Software Configuration ..................................................... 1-5

1.1 Introduction

The D-TuBe provides eight channels of tube pre amp. It has been designed to fit neatly

into existing DiGiCo systems by simply replacing the last input module on a stage rack

and moving the output module along by one slot. This keeps the full complement of 56

inputs to the stage rack, with the last eight inputs now being TuBes.

1.2 Normal Operation

Operation of the D-TuBe is exactly the same as a standard Mic Input card.

When a D-TuBe input is selected as a source for an input channel, analogue gain and

digital trim controls will be shown at the top of the input channels.

The analogue gain control is pre valve and can therefore be used to "drive" the valve.

The digital trim control is post valve and can therefore be used to adjust the resulting

output level from the valve.

1-3