ABB Jocab Safety Vital 3 매뉴얼

{카테고리_이름} ABB Jocab Safety Vital 3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB Jocab Safety Vital 3 14 페이지. Safety controller
ABB Jocab Safety Vital 3에 대해서도 마찬가지입니다: 작동 지침 (11 페이지)

페이지 인쇄

Safety controller

Vital

Vital is based on a single channel safety concept where multi-

ple safety sensors can be connected in series and monitored

with a single safety controller. A dynamic signal is sent from

Vital through all connected sensors, and then returned to Vital

which then evaluates the received signal. As each safety sen-

sor inverts the signal, it is possible to detect short circuits or

faults in any of the sensors. Vital 2 and Vital 3 are designed

for use with ABB Jokab Eden sensors, Tina components and

Spot light grids or similar products. Vital 2 and 3 are both

safety controllers with two safe input functions and two output

groups, the only difference between the two models being in

the input conﬁguration.

5:6

Approvals:

TÜV Nord – Vital 1

TÜV Rheinland – Vital 2 and 3

Control of:

Entire safety system based on

the dynamic safety circuit.

Features:

Easy installation

Flexible

Cost effective

Display for troubleshooting

(Vital 2 and 3)

A wide range of safety sen-

sors can be connected into the

circuit

Several safe outputs

Information output

Outputs with time delay

(Vital 2 and 3)

ABB