Axxess AX-BASSKNOB 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Axxess AX-BASSKNOB에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AX-BASSKNOB 6 페이지. Bassknob for subwoofer control

1. Locate the factory amp (†), unplug all connectors, then remove the amp.

2. Install the AXDSPX-ETH1 harness and make all necessary connections, but leave the amp

turn-on wire disconnected.

3. Plug the 8-pin and 16-pin connectors from the AXDSPX-ETH1 harness into the

AXDSPX-ETH1 interface.

4. Download and install the AXDSP-X app from the Google Play Store or Apple App Store.

5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the

mobile device to the AXDSPX-ETH1. (Figure A)

6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to

save the configuration. (Figure B)

7. Connect the amp turn-on wire from the AXDSPX-ETH1 harness.

8. Click the Identify button to confirm that the AXDSPX-ETH1 is connected properly. If so, a

chime will be heard from the front left speaker or gauge cluster. Test all functions of the

installation for proper operation.

9. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup

Instructions tab, or online at

Axxessinterfaces.com

INSTALLATION

for an explanation of each tab in the app.

(Figure A)

(Figure B)

REV. 11/14/22 INSTAXDSPX-ETH1