Axxess AX-BASSKNOB Інструкція з монтажу Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари Axxess AX-BASSKNOB. Axxess AX-BASSKNOB 6 сторінок. Bassknob for subwoofer control
Друкувати сторінку
1. Locate the factory amp (†), unplug all connectors, then remove the amp.
2. Install the AXDSPX-ETH1 harness and make all necessary connections, but leave the amp
turn-on wire disconnected.
3. Plug the 8-pin and 16-pin connectors from the AXDSPX-ETH1 harness into the
AXDSPX-ETH1 interface.
4. Download and install the AXDSP-X app from the Google Play Store or Apple App Store.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AXDSPX-ETH1. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to
save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AXDSPX-ETH1 harness.
8. Click the Identify button to confirm that the AXDSPX-ETH1 is connected properly. If so, a
chime will be heard from the front left speaker or gauge cluster. Test all functions of the
installation for proper operation.
9. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at
Axxessinterfaces.com
INSTALLATION
for an explanation of each tab in the app.
(Figure A)
(Figure B)
REV. 11/14/22 INSTAXDSPX-ETH1
3