Axxess AX-GMCL2-SWC 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Axxess AX-GMCL2-SWC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AX-GMCL2-SWC 12 페이지. Gm data interface with swc 2000-2013
Axxess AX-GMCL2-SWC에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)

페이지 인쇄

STEERING WHEEL CONTROL SETTINGS

Dual assignment legend

1. Not allowed

4. Seek-Down/

2. Not allowed

5. Mode/Source

3. Seek-Up/Next

6. ATT/Mute

* Not applicable in this application

Resetting the AX-GMCL2-SWC

1. The Blue reset button is located inside the interface, between the two connectors. The button is accessible outside the

interface, no need to open the interface.

2. Press and hold the reset button for two seconds, and then let go to reset the interface.

3. Refer to "Programming the Interface" from this point.

AxxessInterfaces.com

7. Preset-Up

10. Band

8. Preset-Down

11. Play/Enter

9. Power

12. PTT

TROUBLESHOOTING

(CONT)

13. On-Hook

16. Fan-Down *

14. Off-Hook

17. Temp-Up *

15. Fan-Up *

18. Temp-Down *

AX-GMCL2-SWC

I N S TA L L AT I O N I N S T R U C T I O N S

IMPORTANT

If you are having difficulties with the installation of this product,

please call our Tech Support line at 1-800-253-TECH. Before doing

so, look over the instructions a second time, and make sure the

installation was performed exactly as the instructions are stated.

Please have the vehicle apart and ready to perform troubleshooting

steps before calling.

NOWLEDGE IS

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

OWER

REV. 7/24/18 INSTAX-GMCL2-SWC