Accurex PCX-200 Series 사용자 설명서 - 페이지 2
{카테고리_이름} Accurex PCX-200 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurex PCX-200 Series 8 페이지. Weighing indicators
INTRODUCTION
Before starting the equipment, please read this user's manual carefully
and follow the recommendations for use.
RECOMMENDATIONS FOR USE
For maximum performance and best results, we recommend installing the
scale according to the following recommendations:
• Do not exceed the maximum capacity of the scale, this could damage
the load cell. In case of overload the fault will be exempted from the
guarantee.
• Do not leave any load on the scale for a long time. This could decrease
its accuracy and shorten the life of the load cells.
• When the scale runs out of battery, please replace the batteries.
• Do not attempt to repair the scale yourself, contact the Service
Department.
• Avoid temperature extremes, do not expose the scale to direct sunlight,
and avoid working near air conditioning.
• Install it on a flat surface with a stable base and free from vibration.
• Keep away from equipment which produces magnetic or acoustic
interference. Remove the batteries from the equipment if it is not to
be used for an extended period.
• Keep it in a dust and dirt free environment. Avoid any direct contact
with water.
• Keep your equipment clean
• Calibrate it at its final location and if necessary perform periodic checks
(an optional calibration weight is required).