Epson 10600 - Stylus Pro Color Inkjet Printer 빠른 참조 - 페이지 6
{카테고리_이름} Epson 10600 - Stylus Pro Color Inkjet Printer에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 10600 - Stylus Pro Color Inkjet Printer 10 페이지. Product brochure - efi fieryspark professional 2.0 rip
Epson 10600 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 사양 시트 (8 페이지), 빠른 설치 매뉴얼 (34 페이지), 사양 (4 페이지)
페이지 인쇄
Checking Ink Levels and Replacing Ink Cartridges
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace it
before you start. Or, you can wait until the ink runs out,
replace the cartridge, and then continue the job without
any loss of print quality.
Checking Ink Levels
1
Press the
button until
SelecType
appears on the display.
MENU
2
Press the
button. The printer's firmware number
Item
appears.
3
Continue pressing the
amount remaining for each of the 6 inks:
E*****F = full
E**** F = 3/4 full
E***
F = 1/2 full
E**
F = 1/4 full
E*
F = nearly empty
E
F = empty
4
Press
to exit the Printer Status menu.
SelecType
Replacing Ink Cartridges
When one of the
Ink Out
displayed on the control panel, the corresponding cartridge
is nearly empty. Make sure you have the correct
replacement cartridge.
EPSON Photographic Dye
• Black
T499201
• Cyan
T502201
• Magenta
T501201
EPSON Archival
™
ink
• Black
T511201
• Cyan
T514201
• Magenta
T513201
EPSON UltraChrome
™
ink *
• Photo Black
T549100
• Matte Black
T549800
• Cyan
T549200
• Magenta
T549300
* Your printer uses one black ink cartridge (Matte Black or Photo Black). To switch black
ink types, you have to follow a special procedure (see your Printer Guide), so be sure to
replace the black cartridge with the same type as you are currently using.
PRINTER STATUS
button to display the
Item
lights is flashing and
INK LOW
™
ink
• Light cyan
T504201
• Light magenta
T503201
• Yellow
T500201
• Light cyan
T516201
• Light magenta
T515201
• Yellow
T512201
• Light cyan
T549500
• Light magenta
T549600
• Yellow
T549400
When one of the
displayed on the control panel, the cartridge is empty. To
replace the cartridge, first make sure the printer is on.
1
Push the indentation on the ink compartment cover
to release the lock and open the cover.
2
Locate the slot containing the empty ink cartridge
corresponding to the
is
the top of the clamp and pull it forward.
6
lights stays on and
Ink Out
light. Press down on
Ink Out
Continue
is
Ink Out