Epson 1160 CFS 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} Epson 1160 CFS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1160 CFS 12 페이지.
The printer cover un-snaps from the printer housing. There are no screws holding
it. Just a little bit of force in the right direction and it pops off. Keep it near by to
use to cover the printer if you plan on leaving it unattended for a long period of
time, like a vacation break. You do not have to remove the printer cover, but it has
to be up when the printer is running.
4. Remove Cartridge Clamps – See photo
Push the paper feed button and hold it down until the cartridge holder moves to
the left. Pull the power plug out when the cartridge holder is in its left position.
This will keep it from returning to the right unexpectedly. Don't plug the power in
until later.
Use a thin flat screw driver blade to remove the clamps. Be sure not to break them.
You may need them some day. Remove the black clamp first. This will give you more
room to remove the larger color clamp. Follow the instructions on the above photo.
You may need a small flash light to help you see what is happening where the clamps
attach. They will both come out clean with no damage to either the clamp or the
printer, so don't be over aggressive. It is a bit of a puzzle but it can be done easily.
Both the blue piece and the black piece have to be removed.
S a v e
M o n e y
a n d
I m p r o v e
Y o u r
P r i n t i n g
MIS Associates Inc
2901 Auburn Rd
Auburn Hills, MI 48326
800-445-8296
http://www.inksupply.com
Fax: 248-289-6013
Email: [email protected]