Axxess AXDIS-FD3 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Axxess AXDIS-FD3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AXDIS-FD3 16 페이지.

From the 16-pin harness to the aftermarket radio, connect the:

• Red wire to the accessory wire.

• Orange/White wire to the illumination wire (if applicable).

• Brown wire to the mute wire, only if equipped with SYNC (if applicable).

Note: If the mute wire is not connected, the radio will turn off when SYNC is activated.

• Gray wire to the right front positive speaker output.

• Gray/Black wire to the right front negative speaker output.

• White wire to the left front positive speaker output.

• White/Black wire to the left front negative speaker output.

The following (3) wires are only for multimedia/navigation radios that require these wires.

• Blue/Pink wire to the VSS/speed sense wire.

• Green/Purple wire to the reverse wire.

• Light Green wire to the parking brake wire

• Tape off and disregard the following (5) wires, they will not be used in this application:

Blue/White, Green, Green/Black, Purple, Purple/Black.

CONNECTIONS