Axxess GMRC-04 설치 지침 - 페이지 3

{카테고리_이름} Axxess GMRC-04에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess GMRC-04 3 페이지. Gm class 2 data bus interface 2000-2005

Installing the GMRC-04

• With all connections completed to the aftermarket radio, plug the 32-

pin harness into the vehicles wiring harness.

• Cycle the key by turning the ignition on for 30 seconds. Then off and

on again to test the radio.

• Mount the GMRC-04 in a location where the internal speaker will be

heard.

Note: If the chime volume of the GMRC-04 is too loud you will need to remove the cover and

cut the solder connection where the arrow points to on the circuit board (between the holes

on the board).

GMRC-04

Cut for low volume