Axxess GMRC-04 Instrukcje instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Sprzęt nagrywający Axxess GMRC-04. Axxess GMRC-04 3 stron. Gm class 2 data bus interface 2000-2005

Drukuj stronę

Installing the GMRC-04

• With all connections completed to the aftermarket radio, plug the 32-

pin harness into the vehicles wiring harness.

• Cycle the key by turning the ignition on for 30 seconds. Then off and

on again to test the radio.

• Mount the GMRC-04 in a location where the internal speaker will be

heard.

Note: If the chime volume of the GMRC-04 is too loud you will need to remove the cover and

cut the solder connection where the arrow points to on the circuit board (between the holes

on the board).

GMRC-04

Cut for low volume