Epson 3880 - Stylus Pro Color Inkjet Printer 제한 보증 - 페이지 7

{카테고리_이름} Epson 3880 - Stylus Pro Color Inkjet Printer에 대한 제한 보증을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 3880 - Stylus Pro Color Inkjet Printer 12 페이지. Printer
Epson 3880 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 (3 페이지), 사양 (2 페이지), 네트워크 매뉴얼 (39 페이지), 브로셔 및 사양 (8 페이지), 여기에서 시작 (2 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 컬러 관리 매뉴얼 (47 페이지), 브로셔 및 사양 (8 페이지), 네트워크 매뉴얼 (38 페이지), 빠른 시작 매뉴얼 (2 페이지)

NOTES:

•

In case shipment of the printer for service becomes necessary, to prevent unrepairable

damage to the printer, the printer should be packaged in its original box and packaging

materials. If you do not have these items, you must contact Epson and Epson will supply

appropriate items for your shipment.

•

The printer is equipped with a pressurized valve system that closes and seals all ink supply

lines. In order for this valve system to properly close, the ink cartridges must be removed

and the ink bay door needs to be closed.

INSTRUCTIONS:

Turn on the printer.

Remove any paper or other media in the printer.

Remove the ink cartridges and close the ink bay door.

Note: To store any partially used cartridges that you take out before shipment, tape over the

needle valve hole until you are ready to use the cartridges again.

Make sure the print head is in the home (far right) position.

Turn off the printer and unplug the power cord. Install the carriage retainer bracket to secure

the print head in place.

CAUTION: Do not turn off the printer by unplugging it or turning off a power strip. You will

not be able to lock the print head in the home position, and ink left inside the reservoir will

leak out, damaging the printer.

WARNING: Components may be hot. After turning off and unplugging the printer, make

sure you allow each component to cool before handling it.