Epson 3880 - Stylus Pro Color Inkjet Printer Limited Warranty - Page 7

Browse online or download pdf Limited Warranty for Printer Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 12 pages. Printer
Also for Epson 3880 - Stylus Pro Color Inkjet Printer: Brochure (3 pages), Specifications (2 pages), Network Manual (39 pages), Brochure & Specs (8 pages), Start Here (2 pages), Start Here Manual (6 pages), Color Management Manual (47 pages), Brochure & Specs (8 pages), Network Manual (38 pages), Quick Start Manual (2 pages)

Print Page

NOTES:

•

In case shipment of the printer for service becomes necessary, to prevent unrepairable

damage to the printer, the printer should be packaged in its original box and packaging

materials. If you do not have these items, you must contact Epson and Epson will supply

appropriate items for your shipment.

•

The printer is equipped with a pressurized valve system that closes and seals all ink supply

lines. In order for this valve system to properly close, the ink cartridges must be removed

and the ink bay door needs to be closed.

INSTRUCTIONS:

Turn on the printer.

Remove any paper or other media in the printer.

Remove the ink cartridges and close the ink bay door.

Note: To store any partially used cartridges that you take out before shipment, tape over the

needle valve hole until you are ready to use the cartridges again.

Make sure the print head is in the home (far right) position.

Turn off the printer and unplug the power cord. Install the carriage retainer bracket to secure

the print head in place.

CAUTION: Do not turn off the printer by unplugging it or turning off a power strip. You will

not be able to lock the print head in the home position, and ink left inside the reservoir will

leak out, damaging the printer.

WARNING: Components may be hot. After turning off and unplugging the printer, make

sure you allow each component to cool before handling it.