Epson 3880 - Stylus Pro Color Inkjet Printer 네트워크 매뉴얼 - 페이지 19

{카테고리_이름} Epson 3880 - Stylus Pro Color Inkjet Printer에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 3880 - Stylus Pro Color Inkjet Printer 38 페이지. Printer
Epson 3880 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 (3 페이지), 사양 (2 페이지), 네트워크 매뉴얼 (39 페이지), 브로셔 및 사양 (8 페이지), 여기에서 시작 (2 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 제한 보증 (12 페이지), 컬러 관리 매뉴얼 (47 페이지), 브로셔 및 사양 (8 페이지), 빠른 시작 매뉴얼 (2 페이지)

12. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the default gateway.

13. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press

then press the

14. Turn the printer off then back on again.

Caution:

After turning off the printer, wait until the status lights go off before turning it

back on; otherwise the network interface may not work correctly.

15. See "Printing a Network Status Sheet" below to print a network status

sheet and confirm the new IP address, which you'll need during setup. You

can also use the EpsonNet Config software to obtain the IP address.

Now you can install the printer software (see "Installing the Printer Software"

on page 20).

Printing a Network Status Sheet

1. Make sure that the printer is not printing and the LCD displays READY.

2. Load three sheets of Letter-size paper.

3. Press the Menu r button on the printer's control panel to enter the printer's

menu system.

4. Press d to highlight TEST PRINT, then press r.

5. Press d to highlight NETWORK STATUS SHEET, then press r.

6. Press

to print the network status sheet.

Cancel/Reset button to exit the printer menu.

Setting Up Your System for Network Printing

, and