Axxess AX-ADFD02 설치 지침 매뉴얼

{카테고리_이름} Axxess AX-ADFD02에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AX-ADFD02 16 페이지. Ford data interface 2011-up

INTERFACE FEATURES

• Provides accessory power (12-volt 10-amp)

• Maintains the retained accessory power (R.A.P.) feature

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains SYNC

• Retains the factory AUX-IN jack

INTERFACE COMPONENTS

• AX-ADFD02 harness

APPLICATIONS

See inside front cover

AxxessInterfaces.com

Ford Data Interface

2011-up*

*Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

INTRODUCTION

The AX-ADFD02 harness is designed for, and must be used with, the

AX-ADBOX1 or AX-ADBOX2 interface (sold separately). Please refer to the

AX-ADBOX1 or AX-ADBOX2 for the 16-pin connector with stripped leads.

• Pre-wired ASWC-1 harness (ASWC-1 sold separately)

• Designed for non-amplified models

• Retains balance and fade

• Micro "B" USB updatable

AX-ADFD02

I N S TA L L AT I O N I N S T R U C T I O N S

TABLE OF CONTENTS

Connections to be made .......................................3

Installing & programming the AX-ADFD02

AX-ADBOX1 ...........................................................4

AX-ADBOX2 ..........................................................5

Extra features .........................................................6

TOOLS REQUIRED

• Crimping tool and connectors or solder gun,

solder, and heat shrink • Wire cutter • Zip ties

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

REV. 6/27/18 INSTAX-ADFD02