Axxess AX-LR904 설치 지침 매뉴얼

{카테고리_이름} Axxess AX-LR904에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AX-LR904 8 페이지. Land rover freelander 2 (with m.o.s.t. 25 amplifier) data interface with swc & factory display retention2006-2014

페이지 인쇄

Land Rover Freelander 2

Data Interface with SWC & Factory Display Retention

INTERFACE FEATURES

• Provides accessory power

• Designed for amplified models

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains parking sensor chimes

* Attention! The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn't have a backup camera

Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.

INTERFACE COMPONENTS

• AX-LR904 interface

• AX-LR904 amplifier interface

• ASWC-1 interface

• AX-LR904 harness

AxxessInterfaces.com

(with M.O.S.T. 25 amplifier)

• Retains balance

• Retains factory features: date, time

• Retains most of the vehicle settings that was displayed on the

factory radio *

• Micro "B" USB updatable

• ASWC-1 harness

• M.O.S.T. jumper harness

• Female 3.5mm connector with stripped leads

• Chime speaker

2006-2014

AX-LR904

I N S TA L L AT I O N I N S T R U C T I O N S

TABLE OF CONTENTS

Connections to be made .......................................2

Installing the AX-LR904 interface .........................3

Programming the ASWC-1 interface ................. 3-4

Screen operation ................................................4-6

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.) • Zip ties

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

REV. 6/21/18 INSTAX-LR904