Axxess CHTO-013 설치 지침 - 페이지 4

{카테고리_이름} Axxess CHTO-013에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess CHTO-013 4 페이지. For chrysler vehicles 2004-up

INSTALLATION INSTRUCTIONS FOR PART CHTO-013

Installing the CHTO-013

• With all connections completed to the aftermarket radio, plug the 22-pin harness into the vehicles

wiring harness.

• Reconnect the negative battery terminal.

• Cycle the key, by turning the ignition on for 30 seconds. Then off and on again to test the radio.

Testing the CHTO-013

• Turn the ignition on if not already, and then turn the radio on to verify that the radio works. Check

balance and fader controls for proper operation.

For amplified models only:

• To adjust the overall volume of your audio system rotate the potentiometer, which is located on the

16-pin side of the interface clockwise.

METRA. The World's best kits.

™

Our installation parts and kits make aftermarket stereo and video installation a breeze.