Axxess CHTO-013 Installatie-instructies - Pagina 4
Blader online of download pdf Installatie-instructies voor {categorie_naam} Axxess CHTO-013. Axxess CHTO-013 4 pagina's. For chrysler vehicles 2004-up
Pagina afdrukkenINSTALLATION INSTRUCTIONS FOR PART CHTO-013
Installing the CHTO-013
• With all connections completed to the aftermarket radio, plug the 22-pin harness into the vehicles
wiring harness.
• Reconnect the negative battery terminal.
• Cycle the key, by turning the ignition on for 30 seconds. Then off and on again to test the radio.
Testing the CHTO-013
• Turn the ignition on if not already, and then turn the radio on to verify that the radio works. Check
balance and fader controls for proper operation.
For amplified models only:
• To adjust the overall volume of your audio system rotate the potentiometer, which is located on the
16-pin side of the interface clockwise.
METRA. The World's best kits.
™
Our installation parts and kits make aftermarket stereo and video installation a breeze.