Axxess CHTO-013 Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} Axxess CHTO-013. Axxess CHTO-013 4 pagina's. For chrysler vehicles 2004-up

Pagina afdrukken
Applications
HaRnESS (a) - LD-CHTO-31
CHRYSLER
DODGE
300
2005-2007
Magnum
Ram 1500
Aspen
2007
DODGE
Ram 2500/3500
Caliber
2007-2008
JEEP
Charger
2006-2007
Dakota
2005-2007
Commander 2006-2007
Durango
2004-2007
Compass
HaRnESS (B) - LD-CHTO-33
CHRYSLER
DODGE
200
2011-up
Journey
300
2008-2010
Magnum
Aspen
2008-2009
Nitro
Sebring
2007-2010
Ram 1500
Town & Country
Ram 2500/3500
2008-up
DODGE
Ram Chassis Cab
Avenger
2008-up
JEEP
Caliber
2009-2012
Commander 2008-2010
Challenger
2008-up
Compass
Charger
2008-2010
Grand Cherokee
Dakota
2008-2011
Durango
2008-2013
Liberty
Grand Caravan 2 008-up
Patriot
JEEP
(continued)
(continued)
2005-2007
Grand Cherokee
2006-2008
Patriot
2006-2009
MITSUBISHI
Raider
2007-2008
JEEP
(continued)
(continued)
2009-2010
Wrangler
2008-2009
MITSUBISHI
2007-2011
2009-2011
Raider
RaM
2010-2011
1500/2500/3500
2011
Chassis Cab 3500/5500
2009-up
C/V Tradesman
2008-2013
vOLkSWaGEn
2008-2013
Routan
2009-up
CHTO-013
Connections to be made
From the 16-pin harness
• Connect the (2) Red wires to the ignition/accessory wire of the aftermarket radio.
• Connect the Orange/White wire to the illumination wire of the aftermarket
2005-2007
radio. If the aftermarket radio does not have an illumination wire, tape off the
2007-2008
Orange/White wire.
• Connect the Blue/White wire to the amp turn on wire of the aftermarket radio.
2006-2007
• Tape up the Brown wire. It will not be used in this application.
For vehicles with built-in navigation (only), make the following
connections:
• Connect the Light Green wire to the parking brake wire of the aftermarket
navigation radio.
2007-up
• Connect the Blue/Pink wire to the VSS or speed sense wire of the
aftermarket navigation radio.
2008-2009
• Connect the Green/Purple wire to the reverse wire of the aftermarket
navigation radio.
2012-2012
Only make the following connections if the vehicle is amplified:
2012
• Connect the White wire to the left front positive speaker output of the
aftermarket radio.
2012-up
• Connect the White/Black wire to the left front negative speaker output of the
aftermarket radio.
2009-2013
Continued on next page
2