DigiDesign FWx FireWire 매뉴얼 - 페이지 10
{카테고리_이름} DigiDesign FWx FireWire에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiDesign FWx FireWire 18 페이지.
페이지 인쇄Mix Rack FWx Card Installation
This section shows how to install an FWx card into a
Mix Rack. One FWx card can be installed in a Mix Rack. An
FWx card and an HDx card cannot be used simultaneously.
For FOH Rack installation instructions, see "FOH Rack
FWx Card Installation" on page 3.
To install the FWx card in the Mix Rack:
Shut down your system.
1
Power down your Mix Rack.
2
Disconnect all power, audio, FOH Link, and any other cables
3
attached to the Mix Rack.
Remove the front panel faceplate by unscrewing its mount-
4
ing screws (#1 Phillips). Keep the screws nearby for remount-
ing the front panel later.
Mounting screws (remove all)
Front of the Mix Rack
6
FWx Record/Playback Option Card
On the Mix Rack back panel, remove the top expansion slot
5
cover by unscrewing its mounting screws. Keep the screws
nearby in order to secure the FWx card to the Mix Rack.
Back of the Mix Rack
Although there are two expansion slots in which you can in-
stall the FWx card, for ease of installation it is suggested
that you install the card in the top expansion slot.
Remove the FWx card from its packing material. Hold the
6
card by its edges.
Faceplate
Mounting bracket
FWx card showing bracket and connectors
Power connector
Ribbon Cable connector
Top expansion
slot cover
(remove)